Solar Synergy: Canadian Solar EP CUBE All in One 7.6kW 6.6-19.9kWh Hybrid Energy Storage System The Canadian Solar EP CUBE All in One Hybrid Energy Storage System (ESS) is crafted for optimal energy storage and seamless integration with your solar power system. Each battery module is 3.3 kWh in size, and is designed for stackable capacities of 9.9 kWh to 19.9 kWh per unit. Its modular design allows for easy expansion, enabling homeowners to scale up their energy storage. With the ability to connect up to six Canadian Solar 7.6kW hybrid inverter units in parallel, you can achieve up to 119.9 kWh of storage and 45.6 kW of output, perfect for larger energy needs. Easy to install and transport, the All in One Hybrid ESS empowers users to reduce grid reliance and boost energy independence. It also comes with a limited warranty of up to 10-years or 6,000 cycles, making it a long-lasting solution for your energy needs. You can install new Solar Panels, positioned on a rooftop or the ground, or, if you have a grid-tie solar system, then you can connect its solar panels through AC output of its existing PV inverter. The choice between direct connection or using an external PV inverter depends on your existing solar setup and future expansion plans, making it suitable for new installations or retrofits This stored energy undergoes seamless conversion through the Hybrid Inverter, transforming it into alternating current for use by homes or small businesses connected to the solar panels. The Hybrid ESS intelligently manages excess energy, either storing it in the battery or seamlessly directing it into the National Grid. Unlock the potential of the Hybrid ESS, enabling you to use generated electricity precisely when needed. Charge the battery pack with renewable energy from 22x JA Solar 460W Mono MBB Percium Half-Cell Silver Frame MC4 solar photovoltaic (PV) panels. The renewable energy generated during the day can be stored, ensuring a sustainable power source for evening activities like boiling the kettle or powering electronic devices. Tailor the Hybrid ESS to your unique needs, considering current energy usage, the size of existing generation technologies, and plans such as acquiring an electric vehicle (EV) or implementing a heat pump for home heating. Empower your energy future with the Hybrid ESS. Pay zero VAT, save money and time, when you order an installation via one of our trusted partners! Click here to enquire today. Are you an installer? This product is designed for quick installation. Become a partner, delight your customers and grow your business. Call 020 8064 0335 to become an authorised partner today. ▼ HYBRID ESS Features EP CUBE 7.6kW 1PH HYBRID INVERTER is the combination of a solar charge controller and a battery inverter into a single piece of equipment that can intelligently manage power from your solar panels, battery, and the grid at the same time. The Canadian Solar Hybrid Inverter is a good choice for On-Grid / Off-Grid integrated storage solutions. EP CUBE HYBRID INVERTER provides 7.6kW in on-grid and back-up modes to support essentials, as well as 24-hour fully intelligent energy management and real-time PV system status monitoring. EP CUBE HYBRID ENERGY MANAGEMENT SYSTEM (EMS) Switches to the battery in less than 30ms if the grid is down; Intelligent EMS function, improving battery's reliability; Remote control & upgrade function, providing digital power plant maintenance at your fingertips. EP CUBE HYBRID INVERTER WORKING MODES There are three operating modes of the Hybrid Inverter: Self-Consumption Mode. Backup Mode, and Time-of-Use Mode. SELF CONSUMPTION MODE: During self-consumption mode power generated by PV is utilised to supply power to connected loads as a priority. Any surplus power is then used to charge the battery modules. Only once battery modules are fully charged, power is exported to grid. In an instance when power generation by PV is lesser then loadconsumption, battery modules discharge to support loads. Once the battery modules SOC reaches set value for reserve SOC, then loads are supported by grid power.. BACKUP MODE: During backup mode power, EP CUBE is charged at the rated power to the SOC value set by the user, and then batteries are in standby. Batteries are charged from PV power, and if excess PV power is not enough than grid power is used for charging. When the battery is fully charged, if the SOC value set by the user is not 100%, the SOC difference still be used to support load. When a power failure or grid outage occurs, EP CUBE seamlessly switch to provide backup power to householdload. TIME-OF-USE MODE (TOU) During TOU mode user can set off-peak, peak and peak hours. 3 time-slots can be set for each category. During Off peak hours, EP CUBE can only be charged from PV as priority power source. If PV power is not in excess then user can allow to charge the EP CUBE with low price electricity from grid during off peak hours in order to ensure full charge before peak hours. EP CUBE 3.3kWH 30-43,8VDC LONG LIFE LIFEPO4, EXPANDABLE, HIGH-EFFICIENCY STORAGE BATTERY is covered by a 10 years product warranty (100% Depth of Discharge); Storage capacity is expandable to 19.9kWh (6 modules in stack); Easy plug & play installation. (Optional) 22x JA SOLAR 460W MONO MBB PERCIUM HALF-CELL SILVER FRAME MC4 (JAM72S-20-460-MR-MC4-SM) is a solar power source which captures up to 10.12kW DC electricity (2x11 panels strings) to use immediately in the home or a business, store excess energy in the battery or feed into the National Grid. The panel features JA Solar's innovative design with the high panel efficiency and power output of monocrystalline cells, enabling you to get more out of the space available – helping to lower your energy bills and shorten the payback time through increased yield and lower costs. 4-5 WORKING DAYS DELIVERY within the UK (longer to the Highlands, islands and Northern Ireland). ▼ HYBRID ESS Specifications EP CUBE 7.6kW 1PH HYBRID INVETER SOLAR INPUT Max. Solar Power (Wp): 10.0kW Max. Input Voltage: 600V MPPT Voltage Range: 90-550V Number of MPPT Trackers: 2 Number of PV Strings per MPPT Tracker: 1 Max input power per MPPT: 5kW Max. Input Current per MPPT: 16A Max. Short Circuit Current per MPPT: 20A MPPT start-up voltage: 120V AC OUTPUT (GRID SIDE) Max continuous power (battery + PV): 7.6kW Operation Phase: 1/N/PE Nominal Output Voltage: 220-230VAC Nominal Frequency: 50Hz Max continuous current (battery + PV): 33A Power Factor: ~1 (adjustable from 0.8 leading to 0.8 lagging) Total harmonic distortion @7.6 kW: <3% (rated power) EFFICIENCY Max. Efficiency: 93.93% (CEC efficiency) AC Round-trip Efficiency: Up to 95% for energy storage applications AC OUTPUT (BACKUP) Max continuous power (battery + PV): 7.6kW Max continuous current (battery + PV): 33A Nominal Output Voltage: 220-230VAC Nominal Output Frequency: 50Hz Switching-time: <30ms Inverter weight: <38kg Inverter size: 600 x 505 x 243 mm Warranty: 10 years EP CUBE BATTERY Battery Type: LiFePO4 Number of Batteries: 2-6 Nominal Capacity: 6.6kWh (2), 9.9kWh (3), 13.3kWh (4), 16.6kWh (5), 19.9kWh (6) Max continuous power (battery only): 3kVA (2), 5kVA (3), 6.5kVA (4), 7.6kVA (5-6) Voltage Range: 30 VDC ~ 43.8 VDC Nominal voltage: 38.4 VDC Depth of Discharge: 100% Warranty Time: > 80% capacity, up to 10 years or 6,000 cycles Operating Temperature Range: -20 ~ +55°C (recommended 0 ~ +30°C) Humidity: 5% to 95% (No Condensing) Ingress Protection: IP67 (stacked together) Net Weight: <35kg Size (W*H*D): 600 x 215 x 165 mm ACCESSORIES EP Cube AC Switch Box: EP CUBE ASB1-40 EP Cube Smart Meter: EP Cube 1PHM1 EP Cube Wall-mount Kit: EP Cube Wall-mount Kit1 Warranty Accessories: 2 years ▼ HYBRID ESS In the Box 1x EP CUBE Hybrid Inverter 220-230VAC, 7.6kW (Grid side/Back-Up); 2x - 6x EP CUBE 3.3kWh Battery Module; 1x EP Cube AC Switch Box; 1x EP Cube Smart Meter; 1x EP Cube Wall-mount Kit; (Optional) Up to 22x JA SOLAR 460W MONO MBB PERCUIM HALF-CELL SILVER FRAME MC4 Solar Panels, Efficiency = 20.7%.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
