All-in-One Sunsynk PowerHub Energy Storage System 122.8kWh Battery 65kW Inverter All-in-one three-phase commercial battery storage system with 122.8 kWh LiFePO4 battery capacity and integrated 65 kW PV inverter input capability. 50 kW nominal output and UPS power for solar self-consumption, peak-demand management, load shifting and critical-load support. IP55 floor-mounted cabinet with integrated HVAC, AC/DC coupling capability, generator input and expansion potential up to 1.28 MWh. Sunsynk PowerHub 122.8kWh all-in-one energy storage The Sunsynk PowerHub F120 is a high-voltage, three-phase all-in-one energy storage system for commercial and industrial applications. The cabinet brings together 122.8 kWh of LiFePO4 battery storage, an integrated inverter, BMS, EMS and HVAC temperature control in a single floor-mounted enclosure. It supports both AC- and DC-coupled solar integration, allowing it to be specified for new PV projects or alongside compatible existing grid-tied solar systems. The PowerHub can also be used in on-grid or off-grid system designs and includes a dedicated generator input for redundancy. [file:127][web:118] Key features Integrated commercial system: combines inverter, battery, BMS, EMS and HVAC equipment in one IP55 enclosure. Solar-ready inverter: up to 65,000 W PV input, four MPPTs and a 150–850 V DC MPPT operating range. Three-phase output: 50,000 W nominal output/UPS power at 220/380 V or 230/400 V AC. Flexible site integration: AC and DC coupling, CT-based smart AC coupling and a dedicated generator input. Expandable platform: supports future storage-capacity expansion up to 1.28 MWh. Where to use The Sunsynk PowerHub 122.8kWh battery system is suited to warehouses, logistics premises, agricultural sites, retail units, offices, workshops and small manufacturing facilities. Typical applications include increasing solar self-consumption, reducing peak grid demand, charging from lower-cost tariff periods and supporting critical loads. This is a substantial C&I system rather than an out-of-the-box battery. A trusted qualified partner should design the grid connection, export limitation, PV interface, generator interface, protection, earthing, civil base, lifting plan and commissioning process. Energian offers UK expert support for complete system design. [file:127] Technical specifications System specification Model SS-CS-GE-F120 System type Turnkey, all-in-one AC/DC-coupled energy storage solution Energy configuration 122.8 kWh Module capacity 100 Ah Battery chemistry LiFePO4 Battery operating voltage 500–700 V Charge/discharge current 100 A Maximum charging/discharging efficiency 91.0% Maximum grid AC input 50,000 W Nominal output power / UPS power 50,000 W AC output frequency and voltage 50/60 Hz; 220/380 V, 230/400 Vac Grid type 3L/N/PE AC output rated current 75.8 A Dimensions (W × D × H) 1,780 × 1,056 × 2,235 mm Weight Approximately 2,090 kg Enclosure protection rating IP55 Installation style Floor-mounted Temperature control Built-in HVAC system Grid compatibility On-grid and off-grid installations Generator integration Dedicated generator input Scalability Up to 1.28 MWh Warranty 10 years Inverter technical specification Maximum PV input power 65,000 W Maximum PV input current 36 A + 36 A + 36 A + 36 A Rated PV input voltage 600 Vdc Start-up DC voltage 180 Vdc MPPT voltage range 150–850 Vdc Maximum PV short-circuit current 55 A + 55 A + 55 A + 55 A Number of MPPTs 4 Peak power, off-grid 1.5 times rated power for 10 seconds Power factor 0.8 leading to 0.8 lagging Total harmonic distortion <3% DC injection current <0.5% In Display LCD Operating temperature range -40°C to +60°C; derating above +45°C Relative humidity 15–85%, non-condensing Inverter dimensions (W × D × H) 527 × 294 × 894 mm Inverter communication CAN, RS485, WiFi, Ethernet Grid regulation VDE 4105, IEC 61727/62116, VDE 0126, AS 4777.2, CEI 0-21, EN 50549-1, G98, G99, C10-11, UNE 217002, NBR 16149/NBR 16150 Maximum efficiency 97.6% MPPT efficiency 99.9% Battery technical specification Battery module nominal voltage 51.2 V Battery module energy 5.12 kWh BMS communication CAN Battery module dimensions (W × D × H) 440 × 570 × 133 mm Battery module weight 44 kg Operating temperature range Charge: 0°C to +55°C; discharge: -20°C to +55°C Cycle life ≥6,000 cycles at 25°C ±2°C, 0.5C/0.5C, 70% EOL Battery module certification UN38.3, IEC 62619, IEC 61000 Documents available for download Sunsynk PowerHub F120 Technical Datasheet Sunsynk PowerHub F120 Installation and User Manual Shipping Available for shipping to the UK, Ireland, Africa, the Caribbean and worldwide. If the shipping rate is not shown at checkout, contact us on +44 2080 640335 or [email protected] for a quote. UK expert support UK expert support is available for PowerHub system design, PV and generator integration, battery-storage configuration, logistics and commissioning requirements. Contact Energian by phone, email or live chat, or visit our office for an in-person consultation.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
