Modular Panel Construction with Airtight Joints.Dynasty modular wall, floor, and ceiling panels are fabricated in the Amerikooler plant using state of the art robotic manufacturing and assembly processes; for precise fit, easy assembly and log life. Dynasty panels are 4” thick and manufactured with 100% uniform AK-XPS4 rigid foam. That insulation is permanently bonded to primed metal surface, to form a non-deteriorating structurally-rigid panel.Dynasty panel assembly is accomplished with a time tested, corrosion resistant cam action locking system, and a factory installed NSF compliant compression gasket, to form rigid, airtight jointsAcrylume Stucco Embossed Panel FinishDynasty wall and ceiling panel interiors and exteriors are laminated with 26-gauge zinc-aluminum (Acrylume) coated steel, which is stucco embossed and coated with corrosion resistant acrylic pains.AK-XPS4 Long Life Extruded Foam InsulationAK-XPS4 rigid foam is a closed cell, void-free hydrophobic (water resistant) material that maintains the highest possible R-value over time, to ensure ling term energy efficiency. AK-XPS4 meets and exceeds the EISA Energy Independence & Security Act of 2007 with R-29 value for Coolers. Amerikooler AK-XPS4 insulation is backed by the Dow Chemical Company with a 50 year thermal warrantyStrong Floor ConstructionDynasty floor panels are also 4” thick and manufactured using heavy gauge smooth aluminum, rated to support 600 pounds per-square-foot of uniformly distributed floor load. The include a ½”-radius cove along the interior perimeter, to make cleaning easier.Flush Door HardwareStandard door sizes are: 36”, 30”, or 26” wide, all with a 76” high clear opening. Doors are constructed with 4” thick AL-XPS4 rigid foam insulation and finished with 26-gauge zinc-aluminum (Acrylume) coated steel, which is stucco embossed and coated with corrosion resistant acrylic paint.Each door includes: two heavy duty, super cam-rise spring-assisted hinges, a heay pull handle with key lock and inside safety release, and a door closer is provided for extra positive smooth closing. To ensure a positive seal, the door includes a three sided magnetic gasket and a flexible double wiper at the bottom edge of the door.Fast & Easy AssemblyAmerikooler panels are designed so that job-site installation is fast and easy. All walk-ins are shipped with a hardware and installation instruction kit that includes: the shop drawing, detailed installation instructions, hex wrench for camlock panel assembly, PVC press fit caps and the light globeDoor JambThe door jamb and door are constructed with a non-conductive heavy-duty PVC extrusion that provides a thermal barrier. The jamb includes an incandescent vapor-proof light fixture mounted on the center/top of the jamb, which provides extra space for shelving posts. A digital LED thermometer is provided with On/Off pilot ligh 4” thick AK-XPS4 insulation with R-values of R-29 for coolers and R-32 for freezers Insulation provides exceptional moisture resistance and long-lasting structural integrity for panels 26 gauge Acrylume® coated corrosion resistant stucco embossed Galvalume on all interior and exterior surfaces 30”W x 76”H or 36”W x 76”H flush mounted door 2 super cam-rise spring assisted hinges Deadbolt keyed handle latch Interior safety lock release handle Spring actuated door closer Digital LED thermometer with on and off pilot light switch Vapor proof light fixture centered on interior door jamb Smooth aluminum floor finish rated at 600 Lbs. per sq. ft. of uniformly distributed load Freezer door with temperature regulating thermostat and mounted and pre-wired PRV FeaturesFinishes: Interior walls: 26 Ga. Stucco Embossed Acrylume Exterior walls: 26 Ga. Stucco Embossed Acrylume Interior ceiling: 26 Ga. Stucco Embossed Acrylume Exterior ceiling: 26 Ga. Stucco Embossed Acrylume Insulation: 4" thick AK-XPS4 Ultra extruded foam with R-value of R-29 (with a 50 Year Thermal Warranty.) UL Classified Core Flame Spread 15, Smoke Rating less than 165. Temperature:35°FFloor Type:NSF vinyl screedAccessories:(5) NSF VINYL FLOOR SCREED 72 Door: (1) Standard 36" x 76" Left hinged flush door with brushed hardware. Interior & Exterior finish: 26 Ga. Stucco Embossed Acrylume. Heavy duty deadbolt handle latch. Digital LED Thermometer with pilot light switch. 1807 11w, Vapor Proof, 120V. LED fixture. 82 Lumens /watt Angled face .Requires 115vac. 1 amps. Equipment: (1) 3/4 HP Bohn Outdoor Condensing Unit, Model BHT008X6BFM, 208-230/60/1, MCA 15 Amps, BTUH 7070, Medium Temperature, Hermetic, Air-cooled, R404A, 1 year compressor and parts warranty from date of shipment within Continental USA. (1) Bohn ADT070AEWMC6K, 115/60/1, low profile air defrost evaporator, 1.8 Amps with EC motor, Includes Mounted TXV, LLSV & Thermostat Dimensions Actual Width 7'-10" Actual Length 7'-10 1/8" Actual Height 7'-7" Internal width 7'-2" internal length 7'-2 1/8" Internal height 7'-3" Warranty 50 Year Thermal Warranty 15 Year Panel Warranty 5 Year Doors & Floors Warranty 1 Year Compressor & Parts Warranty 1 Year Labor Warranty Optional 4 year extended compressor warrany available (information upon request)
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
