Route Water Reliably Through Small Features With 3/8-Inch Tubing Aquascape Black Vinyl Tubing (9.5 mm / 3/8 in ID, 30.5 m / 100 ft) is a UV-resistant flexible vinyl tube for low-flow water feature plumbing applications. The 9.5 mm bore is suited to very small submersible pumps, ornamental animal spitters with restricted jet openings, and decorative fountain features where flow rate is deliberately limited for aesthetic effect. Small-Bore Tubing for Decorative Feature Control Some water feature applications specifically benefit from a narrower bore: a small jet through a frog or turtle spitter, a trickling stream over a millstone, or a gentle bubbler in a patio container. The 9.5 mm (3/8 in) tubing produces these lower flow characteristics naturally without requiring additional flow restrictors. The black colour integrates visually with dark stone and substrate, and the 30.5 m (100 ft) roll provides sufficient length for extended routing runs or multiple short runs in a feature installation. Specification Value Inner Diameter 9.5 mm (3/8 in) Length 30.5 m (100 ft) Material UV-resistant flexible vinyl Colour Black Compatible With Standard 3/8 in barb fittings How to Use Cut the tubing cleanly with a sharp utility knife. Push onto a 3/8 in barbed fitting until the barb teeth are fully covered. For low-pressure decorative applications, a zip tie or small hose clamp provides a secure enough connection. For pressurised runs, use a stainless hose clamp. Avoid exposing the tubing to direct sunlight for extended periods; bury it under stone or route it in shadow to maximise service life. Inspect annually for brittleness or cracking at the fitting connections. Ideal for decorative animal spitters, small tabletop fountain heads, millstone features, and any ornamental water feature using very small submersible pumps and requiring a low flow rate through the delivery point.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.