Part Number: D304* 1 handle set will install on 1 door panel. If you have 2 door panels (like a French door) you will need to order 2 handle sets. W&F Trilennium 6 Inch CTC multipoint bore D304 is the new Replacement Handle Set -- Non stock item special order - Allow 1-2 weeks for your order to ship (unless otherwise noted on our website about extended lead times) - No order cancellations or returns D304 is for doors with: 6 inch center to center 1 7/8" or 2 1/8" diameter bores and screw hole placement 5 3/8" Center To Center. Requires: 1 11/16" or 2 1/8" crossbore Model: D304 Standard Set** Screw Hole Placement: 5 3/8" Center To Center Size: for Door Thickness 1 3/4" or 2 1/4" Colors: Victorian Bronze , Satin Nickel, Bright Brass Handing: Universal - Non handed works for both LH and RH swing doors depending on which lever you use for the exterior and interior Style: Active Standard 150 Degree- Has Thumb Turn, Keyed Cylinder and Lever is Operational*** For Single and French Active door panels. (Degree is how far the lever handle rotates for newer style multi point see pictures) Dummy - No Thumb Turn, No Key Cylinder and Fixed Lever**** For Inactive panels in French doors - that is fixed or has independent astragal installed Tumbturn for 3020 - Has Thumb Turn, No Key Cylinder and Fixed Lever* For Inactive panels in French doors that has 3020 lock installed only Active Modified 180° Option (Add-On) This option modifies the lever handle to rotate 180°, which is required for some older multi-point and double bore systems. (See product images for examples of lever rotation.) How to order:This is an additional add-on and must be selected under “Accessory Items.” If you order 1 handle set → add Qty 1 of the 180° modification If you order 3 handle sets → add Qty 3 of the 180° modification Each handle set that needs this modification requires its own quantity. Handle Sets have been known to have been used on Bayer, Pella, Peachtree and other door brands. Known W&F old handle set Pat No. 4,671,089 stamped on back of trim plate Notes for other options for this style hardware on older doors: D304 is manufactured for the current multipoint system and will work for you right out of the box - order Active Standard 150 Degree (see pictures). If you have older style multipoint or backset lock and dead bolt with 6” center to center bore and screw hole placement is 5 3/8" Center To Center then Active Modified 180 Degree (see pictures) If your door has a 6 inch center to center 2 1/8" standard double bore with back set latch and dead bolt and screw holes are also 6" center to center you need to order part number 852). If you are not sure what type of system your door has, please send us pictures of your handle set with the door panel open so we can see the hardware that the handle set connects to inside the panel. Email pictures to: [email protected] footnotes: Non stock - Estimated 1-2 week for your order to ship - No order cancellations or returns *Active Modified 180 Degree bushing or cartridge has no manufacturer warranty Warranty claims are handled on a case by case basis by the manufacturer. Pictures need to be emailed to [email protected] to submit a warranty claim for factory to review. This handle set also comes in other Models: See part numbers: D300, D301, D302, D304 ****Operational Lever: Can move up and down when door is unlocked Fixed Lever: Inactive, and is intended for push/pull function. Do NOT use a power driver tool to attach the handle set face plate retaining screws. Thread damage can result and is NOT considered a product defect. Associated Parts Sold Separately: S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation For Trilennium Multi Point - Email us for quote. [email protected]
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
