LIQUIDARMOR™ - CM Flashing and Sealant is an innovative liquid flashing alternative to conventional tape. It is designed to provide commercial buildings advanced moisture and air sealing protection. Used In Joint sealant and window flashing for Dow’s commercial wall systems Product Advantages An innovative alternative to flashing tape The elastomeric spray forms a tight, durable, seamless barrier along the rough openings of windows and doors while helping to significantly reduce labor time Fast and easy to use, fluid applied joint treatment option which installs quickly, and conforms to complex geometries easily Building Code Compliance When used as part of THERMAX™ Wall System or Ultra Wall System, LIQUIDARMOR™ -CM Flashing and Sealant complies with the following standards listed in the codes: ASTM E2357, Standard Test Method for Determining Air Leakage of Air Barrier Assemblies ASTM E331, “Water Penetration of Exterior Windows by Uniform Static Air Pressure Difference.” Typical Physical Properties Typical Physical Properties of LIQUIDARMOR™ - CM Flashing and Sealant Liquid Properties Cured Properties Form Grey-blue, sprayable sealant ASTM D412 Tensile Strength 340 psi Volatile Organic Compounds (VOC) 2.3 wt% ASTM D412 Elongation at Break 270% Density 11.4 lbs./gal. ASTM E96 Water Vapor Transmission 4 perms Total Solids 75% Accelerated Weathering AC 148, 45.2 Passes Shelf Life 1.5 years Nail Sealing Ability ASTM D1970/AC 148 Sec. 4.2 Passes
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
