Dyness PowerBrick Plus 16.07kWh LV Battery 16.07kWh low-voltage battery for storing solar generation, time-of-use electricity and backup energy for compatible home energy systems. IP65-rated enclosure for indoor or outdoor installation, with floor- and wall-mounting options. Expandable to 50 parallel units, providing up to 803kWh nominal system capacity where the inverter and installation design permit. Dyness PowerBrick Plus 16.07kWh The Dyness PowerBrick Plus is a 51.2V lithium iron phosphate (LiFePO4) battery designed for low-voltage residential energy-storage systems. It helps increase on-site use of solar generation, supports electricity-tariff optimisation and can form part of a properly designed backup-power system with a compatible inverter. Its integrated wheels assist handling, while the IP65 enclosure and floor- or wall-mounting options give installers flexibility in choosing a suitable location. The battery must be installed and commissioned as part of a compatible energy-storage system. Key features High usable capacity: 16.07kWh nominal and 15.27kWh usable energy. High current capability: up to 200A maximum charge and discharge current, with 300A peak discharge for two minutes. Scalable storage: supports up to 50 units in parallel, from 16kWh to 803kWh nominal capacity. Outdoor-ready enclosure: IP65 protection rating for suitable indoor or outdoor installations. Built-in safety provision: aerosol fire extinguisher; optional automatic self-heating supports operation down to -20°C. Where to use Use the Dyness PowerBrick Plus 16.07kWh LV Battery in homes, larger domestic properties, workshops and small commercial sites with a compatible low-voltage hybrid inverter. It is suitable for solar self-consumption, off-peak charging and energy resilience where the connected inverter supports backup operation. Compatible inverter brands listed by Dyness include Solis, GoodWe, Growatt, SMA, Victron, Deye and APsystems. Compatibility depends on the specific inverter model, firmware and system configuration, so confirm this before ordering. Installation should be completed by a qualified installer or one of Energian’s trusted partners. Technical specifications Model PowerBrick Plus Battery type LiFePO4 Nominal battery energy 16.07kWh Usable battery energy 15.27kWh Nominal capacity 314Ah Nominal voltage 51.2V Operating voltage 44.8V–57.6V Recommended charge/discharge C-rate 0.45C / 140A Maximum charge C-rate/current 0.64C / 200A Maximum discharge C-rate/current 0.64C / 200A Peak discharge current 300A for 2 minutes at 25°C Recommended charge/discharge power 7.168kW Maximum charge power 10.24kW Maximum discharge power 10.24kW Depth of discharge 95% Charge temperature range 0°C to 55°C; -20°C to 55°C optional Discharge temperature range -20°C to 55°C Protection level IP65 Communication CAN, RS485 User interface WiFi, app Safety protection Built-in aerosol fire extinguisher Installation Floor-mounted or wall-mounted Regulating wheel 4 pcs Top cover Optional Expansion Up to 50 units in parallel Cycle life 8,000 cycles (0.2C charge/discharge, 25°C, 95% DOD, 70% EOL) Warranty period 10 years Net weight 119kg Dimensions (W × D × H) 435 × 235 × 850mm Certification / safety standards UN38.3, IEC 62619 Compatible inverter brands Solis, GoodWe, Growatt, SMA, Victron, Deye, APsystems, etc. Documents available for download Dyness PowerBrick Plus Datasheet Dyness PowerBrick Plus User Manual Dyness LV Inverter Compatibility List Shipping Available for shipping to the UK, Ireland, Africa, the Caribbean and worldwide. If the shipping rate is not shown at checkout, contact us on +44 2080 640335 or [email protected] for a quote. UK expert support UK expert support is available for inverter compatibility, battery sizing and installation planning. Contact Energian by phone, email or live chat, or visit our office for an in-person consultation.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
