EcoFlow PowerOcean 2 Plus 6kW Single-Phase Hybrid Inverter 6kW single-phase hybrid inverter for solar PV, compatible PowerOcean battery storage and managed home energy use. Up to 12kW maximum PV input across two independent MPPT trackers. Supplied with a 120A smart meter for measuring household grid import, export and energy flows. EcoFlow PowerOcean 2 6kW hybrid inverter for solar and battery systems The EcoFlow PowerOcean 2 6kW Single-Phase Hybrid Inverter is designed for compatible single-phase homes installing solar PV, EcoFlow PowerOcean LFP battery storage, or both. It coordinates energy between the PV array, battery, household consumption and the grid to support solar self-consumption and battery-based energy management. With two MPPT trackers and a maximum PV input of 12kW, the inverter can support solar arrays on two roof orientations or two independently configured strings. This product is supplied with a 120A smart meter. An 80A meter may be available where required by the installation; contact Energian before ordering to confirm suitability. Key features 6,000W rated AC output and 6,000VA maximum apparent power. 12,000W maximum solar PV input across two MPPT trackers. 18A maximum PV input current per MPPT with a single PV input, or 16A per MPPT with dual PV inputs. Compatible with EcoFlow PowerOcean LFP battery storage up to 15.3kWh. IP65-rated enclosure for indoor or outdoor installation in an appropriate location. Where to use the EcoFlow PowerOcean 2 6kW inverter The EcoFlow PowerOcean 2 6kW hybrid inverter is suitable for compatible single-phase homes with existing or planned solar PV and battery storage. It can be specified for solar self-consumption, energy management around household demand, and backup-load systems where the complete installation has been designed for backup operation. It is particularly suitable for larger domestic PV systems, homes with EV charging, heat pumps or higher electrical demand, and properties with solar arrays split across two orientations. Final inverter selection depends on the site supply, proposed solar array, battery capacity, expected loads and grid-connection requirements. This inverter is not a plug-and-play product. A competent installer must confirm PV string voltage and current, battery compatibility, grid metering, protective devices, backup circuits and G98/G99 requirements. UK expert support is available, and Energian can help arrange installation through trusted partners. Technical specifications Model EF HD-P1-6K-S1 Inverter type Single-phase hybrid inverter Meter supplied 120A smart meter Maximum PV power 12,000W Maximum PV input voltage 600V MPPT voltage range 90–520V Number of MPPT trackers 2 Maximum input current per MPPT 18A with single PV input; 16A with dual PV inputs Maximum short-circuit current per MPPT 20A Backfeed current to PV array 0A PV overvoltage category II Battery rated voltage 790V Battery maximum voltage 800V Battery rated current 7.6A Battery maximum current 8.4A Maximum battery capacity 15.3kWh Grid connection L + N + PE Rated AC input power 6,000W Maximum AC input apparent power 6,000VA Rated AC input voltage 220 / 230 / 240V, L + N + PE Maximum AC input current 32A Nominal frequency 50 / 60Hz AC input overvoltage category III Rated on-grid output power 6,000W Maximum on-grid apparent power 6,000VA Rated on-grid output voltage 220 / 230 / 240V, L + N + PE Rated on-grid output current 26.1A Maximum on-grid output current 30A On-grid total harmonic distortion at rated power ≤3% Power factor -0.8 to 1 to +0.8 Maximum backup output power 6,000VA Backup output voltage 220 / 230 / 240V, L + N + PE Backup nominal frequency 50 / 60Hz Backup rated output current 26.1A Backup maximum output current 32A Maximum efficiency >96.5% European weighted efficiency >96% GFCI Supported Insulation resistance detection Supported Anti-islanding protection Supported PV reverse-polarity protection Supported AC overcurrent protection Supported AC short-circuit protection Supported AC overvoltage protection Supported Certificates CE / CB / DEKRA MARK Safety standards IEC/EN 62109-1, IEC/EN 62109-2 Grid-tied standards G98, G99, G100, VDE-AR-N 4105, CEI 0-21, UTE C15-712-1, VDE 0126-1-1, EN 50549-1, C10/11, NTS631, UNE 217001, UNE 217002, PPDS, PTPiREE, PSE, NC RfG, Ordinance No.140, NRS 097-2-1 EMC standards EN/IEC 61000-6-1/2/3/4, IEC 61000-4-16/18/29, IEC 61000-2-2, EN 300328, EN 301489-1, EN 301489-17, EN IEC 62311 Topology Non-isolated Ingress protection rating IP65 Protective class Class I Operating temperature range -20°C to +50°C; derating above +40°C or below 0°C Storage temperature range -30°C to +60°C Operating humidity 0–100%, condensing Maximum operating altitude 3,000m; derating above 2,000m Dimensions (W × D × H) 679.6 × 182.7 × 280mm Weight 21.5kg Noise emission 40dB Night-time self-consumption <30W Cooling method Natural convection Communication methods RS485, CAN, Wi-Fi, Bluetooth, WAN and 4G Wi-Fi frequency range / maximum output power 2,400–2,483.5MHz / 17dBm Bluetooth frequency range / maximum output power 2,400–2,483.5MHz / 8dBm Pollution degree PD3 Environmental category Outdoor / indoor Documents available for download EcoFlow PowerOcean 6kW Hybrid Single-Phase Inverter datasheet EcoFlow PowerOcean 6kW Hybrid Single-Phase Inverter user manual EcoFlow PowerOcean 6kW Hybrid Single-Phase Inverter installation guide Shipping and UK expert support Shipping is available to the UK, Ireland, Africa, the Caribbean and worldwide. If a shipping rate is not shown at checkout, contact us on +44 2080 640335 or [email protected] for a quote. UK expert support is available for product questions, inverter selection and system-design support. Contact Energian by phone, email or live chat, or visit our office for an in-person consultation.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
