* * * * * * * * PLEASE NOTE * * * * * * * * We do not offer returns on this item as it is a serialized product licensed to the purchaser with a warranty offered by the manufacturer. Any issues with the item must be handled through the manufacturer. This item MUST SHIP FREIGHT and CAN NOT SHIP to Alaska or Hawaii. We only ship this item to the lower 48 states! Also California has strict emissions on engines and there are California specific engines sold only to that state that meets those requirements. If the model you are purchasing has a CA specific model available we can not ship this item to California. Any order placed with a shipping address in the above locations will be cancelled and refunded if applicable. Please contact with any questions regarding freight, warranty, returns or other restrictions prior to placing order for this item. Kawasaki 25hp Vertical Engine #FH721V-1-1/8" x 3-15/16" (28.5 x 100mm) The Kawasaki FH721V is a 0.68 l (675 cc, 41.19 Cu In.) V-twin 90 Deg air-cooled 4-stroke internal combustion small gasoline motor with vertical shaft, manufactured by Kawasaki Heavy Industries Ltd., for general-purpose applications. The FH721V has vertical PTO shaft, V-twin 90 Deg design with cast iron cylinder liners and overhead valves (OHV). The engine is equipped with twin-barrel, float type carburetor with fixed main jet, pulse type fuel pump and flywheel magneto transistor type ignition system. The Kawasaki FH721V uses a full pressure lubrication system with spin-on oil filter and dual element air cleaner. The engine was equipped with BENDIX type electric starter and 12V-13A charging coil with a regulator. The Kawasaki FH721V develops 25.3 PS (18.6kW 25HP) at 3600 Rpm and 56 Nm (5.7 kg·m, 41.3 Ft. lb) at 2400 Rpm of torque. A 72.5 mm (2.85 In.) cylinder bore and 76 mm (2.99 In.) piston stroke give the motor a total of 675 cc (41.19 Cu In.) of displacement. Compression ratio rating is 8.1:1..3600RPM EXCEL/HUSTLER REPLACEMENT When selecting a Kawasaki General Purpose Engine It is important to maintain the equipment manufacturer' specifications (e.g., power, torque, starter type and position, fuel tank location, fuel line routing, evaporative systems, air filter type and location, wire harness routing, muffler location, exhaust direction and muffler accessories, such as a deflector spark arrester, etc.). Install all guards, shields and safety devices as required by equipment manufacturer. In addition, the Installer must adjust the engine to the equipment manufacturer's specification (e.g., low idle speed, high idle speed, control cable adjustment, etc.).Please Note:The current recommended replacement is FX730V-CR08-S.This engine has the following specs which are different than the FX730V-CR08-S:726CC - More relative displacement23.5 HorsepowerCanister w/Pre-AirFilter PortShift Type StarterInformation from Kawasaki shoes that the following would be needed:Starter rewire or purchase new bendix starter 21163-0804Adds Pre-Air filter Port & Hi-Vac port on Intake manifoldCan not use original muffler
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
