Not a Bigger Tank Pad. A Different Kind of Support. The HARMONIZE EXT-ZX10R S is a one-piece 3D rider support and tank grip interface for the 2011–2025 Kawasaki ZX-10R, built with a curved support profile. Conventional tank grips add friction to an existing flat surface. The EXT-ZX10R S goes further, adding a raised, contoured support point exactly where the rider's thigh meets the tank. Its three-dimensional TPU structure gives the lower body a defined surface to brace against, while a high-grip surface texture helps maintain consistent contact through that surface. The result isn't just more grip — it's a more functional connection between rider and motorcycle. Flat Profile vs. Curved Profile — Which One Fits Your Riding The EXT Series comes in two profile types, and the difference isn't cosmetic. The standard EXT uses a flat support profile, while the EXT-S wraps a curved profile around the contact point, following the natural angle your thigh makes against the tank rather than meeting it at a single flat plane. For riders who spend more time at deeper lean angles or who found the flat profile's edge less predictable at extreme knee-down positions, the curved geometry of the EXT-S keeps contact more continuous through the full range of body movement — not just when the knee is pressed straight in. Built Around the Rider Contact Point Heavy trail braking into a corner, hard lean angle, and aggressive throttle on exit all place real load through a rider's lower body — and on a bike with the ZX-10R's track pedigree, that load happens often. A flat tank pad can help reduce sliding, but it doesn't change the shape of the contact area itself. The EXT-ZX10R S introduces a curved physical contour at that point. Instead of relying entirely on friction, you can press your knee and thigh against a support surface shaped to follow your leg's natural angle — creating a more stable lower-body reference point through the full arc of a corner, and reducing how much you need to brace through your arms and the handlebars. Developed around the ZX-10R's tank geometry and riding posture, the EXT-ZX10R S integrates support and grip into one compact component, without a modular mounting system or an oversized extension piece. One Structure. Two Functions. The curved profile provides physical support that follows your leg's natural contact angle. The integrated high-grip texture helps you maintain contact with that profile. Both functions are built into one continuous TPU component — no separate grip layer, no interchangeable extension, no additional mounting base to assemble. Dry-fit the component, confirm its position, and install it as one complete unit. What Makes the EXT-ZX10R S Different Curved 3D Support ProfileFollows the natural angle of thigh-to-tank contact, keeping support continuous through deeper lean angles rather than meeting the leg at a single flat plane. High-Grip Surface TextureAn integrated grip pattern helps maintain knee and thigh contact under braking, cornering, and acceleration — street or track. One-Piece TPU ConstructionThe structural profile and textured contact surface are manufactured as a single continuous component, for a clean, uncomplicated installation. Precision Fit for Kawasaki GeometryDesigned specifically for the ZX-10R's tank shape and riding posture — not a generic profile adapted after the fact. Compatible With Existing Tank GripsSits alongside standard aftermarket tank pads without interference, so it can be added to a tank that already has grip pads installed. Defined Lower-Body SupportGives you a consistent surface to brace against through the full range of riding position, from upright to full lean. Pre-Applied 3M™ VHB™ AdhesiveInstalls without drilling, brackets, a separate mounting base, or special tools. Why It Matters on the ZX-10R The ZX-10R places heavy demands on rider positioning through trail braking, corner transitions, and hard acceleration — on the street and at track pace. The EXT-ZX10R S creates a more defined interface between your lower body and the tank, with a curved contour that follows your leg's contact angle through the full range of a corner rather than a single flat pressing point. Together, these give you a more usable support point than a flat grip pad alone, without changing the aggressive, performance-focused character of the bike. Specifications Spec Detail Series HARMONIZE EXT Series Model EXT-ZX10R S Profile Type EXT-S (Curved Profile) Fitment Kawasaki ZX-10R (2011–2025) Product Type 3D Rider Support Interface / Extension Support Kit Configuration One-piece component Material TPU Surface High-grip texture Compatibility Sits alongside standard tank grip pads without interference Installation Pre-applied 3M™ VHB™ adhesive tape Drilling Required No Special Tools Required No In the Box EXT-ZX10R S one-piece support component with pre-applied 3M™ VHB™ adhesive ×1 Surface cleaning pad ×1 Installation Instructions Clean the installation area thoroughly. The surface must be completely dry and free of water, dust, oil, wax, and residue. If necessary, carefully warm the tank surface to approximately 25–30°C (77–86°F) using a hair dryer or heat gun on a low setting. Do not overheat the painted surface. Clean and dry your hands before handling the component or adhesive. Dry-fit the component and confirm its position before removing the adhesive liner. Gradually peel away the liner while pressing the component into position. Apply firm, even pressure across the complete mounting surface to ensure full contact. Allow the adhesive to set for at least 12 hours. Avoid riding the motorcycle or exposing the installation area to water or moisture during this period.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
