Ranger RJS-6T Jack Stands, Set of Two: A Rectangular Base and a Reachable Release Two details separate this pair from the stands sold beside them, and neither is in the headline. The base is 9" x 10.5" (229 mm x 268 mm) — rectangular rather than square or round — and the design includes a handle with a column release, so the stand is adjusted and released from a position a person can actually reach. They adjust from 15.5" (393 mm) to 24.5" (622 mm), and they are sold in pairs, which is how stands should be sold, because a single stand is not a way to support a vehicle. Why the base shape is worth a paragraph A rectangular footprint is a deliberate choice. Vehicles are supported at points along a rocker or a frame rail, and the load that threatens a stand is rarely straight down — it is the fore-and-aft nudge that arrives when somebody leans into a stubborn fastener under the car. A base that is longer in one axis puts more resistance where that push happens, while staying narrow enough in the other to slot between a floor jack, an exhaust and a suspension arm without a fight. It also parks better. Two stands with a 9" x 10.5" (229 mm x 268 mm) footprint sit flat against a wall or stack in a corner, which sounds trivial until you count how much of a small workshop is taken up by things that only get used in pairs. The ratchet, the handle and the release The ratchet column is what carries the load, and Ranger's design locks it under load — the mechanism holds by engagement, not by friction, so it does not creep as the load settles onto it. The part that gets overlooked is the release. Lowering a vehicle is the moment when a stand is least forgiving, and if the release requires reaching underneath a raised car and working a small catch by feel, the job becomes awkward exactly when it should be careful. A handle and column release designed to be operated from beside the vehicle is a small piece of engineering with a genuine safety return. Welded steel construction throughout is the other half of that. There is no folding hardware to work loose over years of load cycles. Check the capacity rating against your vehicle Published ratings for this stand read three ways, so all three are on this page. Ranger spec table Holding capacity 12,000 lbs. (5,443 kg) — the table does not state whether this is per stand or for the pair Model name 6-ton Descriptive copy supplied with the product "a capacity of 6 tons per stand", and up to 12 tons combined when both stands are used together Six tons is 12,000 lbs, so the published table figure is either the rating of one stand or the rating of the set, and the supplied copy's combined figure only holds on one of those two readings. If your vehicle weight is anywhere near either interpretation, confirm the rating with us in writing before ordering — we will get it straight from Ranger. Guessing high on a jack stand is the worst possible direction to be wrong in. Two things are true regardless of how it resolves. A rating is a ceiling, not a target — the number to compare against is the portion of the vehicle's weight that will actually rest on the stands, at the points you have chosen, not the vehicle's total weight and not a hopeful fraction of it. And stands are used in matched sets at manufacturer-designated support points, on a flat, level, sound concrete floor, with the vehicle's weight lowered onto them fully before anybody goes near it. Will they fit your work? Height band: 15.5" (393 mm) to 24.5" (622 mm). Compare that against the height of your designated support points once the vehicle is raised — not the ground clearance as it sits. Footprint: 9" x 10.5" (229 mm x 268 mm) — check there is flat floor at each intended position, clear of drains, joints and cracked slab. Storage: the pair ships at 36 lbs. (16 kg) in a 12" x 13" x 18" (305 mm x 330 mm x 457 mm) carton, so plan a shelf rather than floor space. Perfect for Trucks and SUVs in a general repair shop, where a passenger-car stand is out of its depth. Brake, suspension and axle work — jobs with repeated height changes, which is where the release earns its place. Home garages without a lift, doing full-size vehicle work properly. As backup support under a lifted vehicle during long jobs, alongside the lift's own locks. What is in the box Two stands. Ranger's feature list states the item is sold in pairs, and the 36 lbs. (16 kg) shipping weight is the figure for the set. No pads, extensions or adapters are listed, and we are not going to imply any. Specifications Holding capacity 12,000 lbs. (5,443 kg) as published — see the note above on how to read it Lowered height 15.5" (393 mm) Maximum height 24.5" (622 mm) Base 9" x 10.5" (229 mm x 268 mm) Construction Welded steel, ratchet column with handle release Supplied as Set of two Shipping weight 36 lbs. (16 kg) Shipping dimensions 12" x 13" x 18" (305 mm x 330 mm x 457 mm) Certification, stated plainly The data we hold for these stands claims no independent third-party safety listing, and we are not going to imply one. The distinction is a real one and it costs people money when they assume: a listing granted by an independent North American test house follows testing carried out by that test house, and it is a different document from a manufacturer's own declaration about its own product. Certain insurers, fleet policies and local jurisdictions require the former by name. If yours might, read the requirement before you buy and ask us — we will tell you honestly whether a product meets it. Shipping and delivery We ship to the contiguous United States, the lower 48. Carrier and cost are calculated live at checkout against your own address rather than promised here. If the pair arrives as freight rather than a parcel, inspect the carton with the driver still present and note any damage on the bill of lading before signing it; that note is what supports a claim afterwards. Residential delivery is a distinct service from a commercial dock and carries a residential fee where it applies. If collection suits you better, our pick-up locations are listed further down this page. Warranty Coverage is under the warranty document Ranger publishes for its product line. We hold the document itself rather than a summary of its terms, so no duration is quoted here — ask us for the current copy before ordering if it affects your decision. Independently of any warranty: never weld, drill, heat or extend a jack stand, and do not disassemble one before a claim has been assessed. Modification turns a tested load-bearing structure into an untested one, and taking it apart destroys the only evidence of what went wrong. If a stand is damaged, bent or seized, it is retired — not repaired. Contact us for more information on jack stands. Product Features Sold in pairs Welded steel construction for maximum durability Safety ratchet design assures stands remain locked under load Convenient handle and column release Product Specifications Holding Capacity 12,000 lbs. (5,443 kg) Lowered Height 15.5" (393 mm) Maximum Height 24.5" (622 mm) Base diameter 9" x 10.5" (229 mm x 268 mm) Shipping Weight 36 lbs. (16 kg) Shipping Dimensions 12" x 13" x 18" (305 mm x 330 mm x 457 mm) Pick Up and Delivery Our Pick Up locations for Ranger are located in Santa Paula, California & Theodore, Alabama.Call, text, or chat with us if you have questions. 866-774-7743
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.