The Revent 726G Single Rack Oven Utility Requirements Water and Drain Water Supply: 1/2” ø 35-45 PSI, coldDrain: 32 mmWater quality/ Chemical analysis: Revent Int. requirementMagnesium, Mg: <30 mg/mlCalcium, Ca: 20 - 100 mg/lHardness: 4,0 - 7,0 dHpH at 20˚C: 7,5 - 8,5 pHAlkalinity: >60 m/lChlorides: 10mg/lConductivity: 200 - 800 mS/cm Ventilation Combustion flue: Directly from top of oven connect 5” reducer to 8” tee and install barometric damper (included with oven). Above this damper install draft inducer (included with oven) into 8 “single wall combustion exhaust pipe. Run 8” type “B” vent from top of draft inducer and continue on through the roof. Over Pressure Duct Through door to canopy Oven Damper Exhaust: Through door to canopy Canopy vent: 10” connection. Min 883 cfm required. Customer to provide duct and ventilator fan per local code. Installation requirements The oven must be installed on a levelled non-combustible surface. The oven may be installed flush against a wall. Only the front and top need to be left open for access. The space on top of the oven must be well ventilated and the temperature must not exceed 120°F. This is to avoid damage to electric components. Optional Rack lifts for most types of racks including A-lift, B-lift, Baxter lift, C-lift, D-lift, Lucks lift Platform Heavy Duty Steam system Type 1 canopy GIAC extended PC software Left hinged door. Core temp sensor kit. Prison package Bakes everything without adjustments. The TCC (Total Convection Control) system ensuring even bake, Perfectly even coloured products, Minimized weight loss and Maximized bread volume The HVS (High Volume Steam) system ensuring Excellent texture and Excellent crust Perfect bake without rejects. Industry leading availability and output for 24/7 production. Most flexible choice for a diversified bakery assortment. Simple handling with self-instructive GIAC control panel. Bakes up to four different products at once with our multiple-alarm system. Renowned durability with the longest life expectancy on the market. World leading energy efficiency. Energy save mode. Minimized service cost. Fast assembly through Revent’s unique wedge system. Quick and easy installation. Baking within a few hours Specifications Maximum Heat Capacity 170,000 btuh Temperature range 95-572°F Steam Generation 1.19 gals/20 sec at 482°F Electrical 3PH208-220V+N 13A (3PH440 optional) Dimensions Total shipping weight 2400 lbs* Minimum intake opening(without skid) 39”x56” Minimum intake opening(with skid) 41.5”x62” (standard 2 section + steam box delivery) Minimum intake opening 55.2”x57.1” (optional one-piece shipment without skid) Minimum section tilt up height 106” Recommended Service height 106” Swing Diameter 37.4” Max load of racklift and platform 441 lbs Max pan size 1 single rack (18”x26” or 20”x30”)
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.