Part Number: S1015 Residential SafeGard 2R - Current Style. **Important: Review all information below, pictures along with pdf of truths installation instruction (pdf link below) to ensure WOCD will work on your casement window. Amesbury Truth Residential SafeGard™ 2R Operating Control Device (WOCD) For Casement Windows The easy to operate SafeGard 2 is designed to limit the window opening to less than 4”. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal) see picture figure 3 for more information. (If your window does not have his hinge cavity this WOCD will NOt work on your window). Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. This patented releasable limit device for windows meets the ASTM F2090 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Handing: Left Hand (Stamped with letter "A") or Right Hand (Stamped with letter "B") ****Determine handing by the hinge side of your window from the exterior. When looking at your window from the OUTSIDE of your home if it is hinged on the LEFT then you need a LEFT Hand WOCD)**** Style: We recommend to check with your window manufacture which style to purchase for your window. R2 Standard -Track (with black clip and red button): 8 11/16 Inch Long x 3/4 Inch Wide x 1/4 Inch Deep R2 Narrow - Track (with black clip and red button): 7 1/16 Inch Long x 3/4" Wide x 1/4" Deep (For comparison the old Gen 1 Safegard Style with Red clip that is no longer available size was: 6 3/8" Long x 3/4" Wide X 1/4" Deep C2 For pricing and to order C2 Commercial WODC for 5/8” cavity please email us with how many Left and and Right hand you would want for quote - factory minimums would be required. Truth Installation Instructions: Safeguard 2R Installation Instructions PDF Ordering Instructions for SafeGard 2R: Residential Applications 1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device. 2. The self-locating sash device is designed for a 7/16 in. [11 mm] cavity. Ensure there are no lips or ribs that would block the ability of the sash device to engage with the frame device. Consult the window manufacturer or application if cavity is larger than 7/16 in. [11 mm] or if lips /ribs are present, or if the cavity height on the jamb is significantly different than the sill. Shims may be required. 2.1. Locate the hinge cavity by finding where the hinge arm attaches to bottom of sash. Follow this cavity around the corner of the sash to the vertical sash member 2.1.1. If there is no cavity on the vertical sash member, please consult with your window manufacturer for application review. Includes: Arm Assembly, Track Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions. (Recommended screws are #8 Pan Head, Length and screw type depended on application). Product Highlights Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes WOCD and egress release will not reduce the open area of the window unit beyond applicable code requirements Avoids interference with operation or performance of a window Features and Benefits beyond ASTM F2090-21 Fully concealed unit after installation and window in closed position Easy and accurate installation in the factory or field for residential applications (SafeGard™2R) and factory or field commercial applications (SafeGard™2C) Built-in forgiveness with field adjustment feature and allowing for up to 1/8” sash sag All adjustments can be done inside the home after window is installed Pan head screw (SS) use for ease of handling Concealed arm after released from track Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms Actions to release the device for egress purposes are to be performed without the use of keys, tools or special knowledge WOCD will automatically re-latch when window is fully closed Recommended Mounting Screws. #8 Pan Head, length and screw type dependent on application Safegard 2R Residential Application Info: As a market leader in fenestration hardware, AT engineered, patented, and manufactured a releasable limit device for windows which meets the ASTM F2090 safety requirements for self-resetting, egress capable, fall prevention devices. The ASTM F2090 addresses window fall prevention that helps protect against potential falls by children through open windows. This is done by allowing the window opening to be set at a predetermined position of fewer than four inches (4”) and automatically re-latch when fully closed. AmesburyTruth’s SafeGard™ 2R provides a means that the window, when opened in an initial operation, will limit the venting to less than 4”. By code, two actions are required to open the window fully for egress purposes. This additional operation can be performed without the use of keys, tools, or special knowledge. SafeGard™ Window Opening Control Device is designed to allow for factory installation as well as field application by trained personnel. PRODUCT TIPS 1. We recommend that a casement WOCD be used in casement application where applicable and building codes require such application. Please check the local building codes for applicability and egress size requirements. 2. Casement WOCD can be factory installed or field retrofit on all profile material types where standard/nominal (0.719” W X 0.438”H) hinge cavity is available. Please observe all safety instructions and consult window manufacturer when you have questions or concerns. Please contact sales for application to ensure form, fit, and function for your specific window application 3. Standard 2 walls (vinyl, fiberglass, aluminum, and other composite materials) on the profile are required for proper screw retention 4. Correct handing with proper installation is important to ensure proper operation of the device ARCHITECT SPECS Window Opening Control Devices as required by ASTM F2090-21, the standard specification for window control devices with emergency (egress) release mechanisms. Product will limit the window opening to less than 4” and requires two actions to release the device allowing the window to open fully for egress purposes. Actions to release the device for egress purposes are to be performed without the use of keys, tools, or special knowledge. WOCD will automatically re-latch when window is fully closed. This WOCD shall be “SafeGardTM Casement The easy to operate SafeGard 2R is designed to limit the casement window opening to less than 4”. This patented releasable limit device for windows meets the ASTM F2090-21 (window fall prevention) safety requirements for self-resetting, egress capable, fall prevention devices. Arm assembly has a decal with simple operating instructions, and track is assembled with visible colored plastic to discern the separate operations. Designed to allow for factory installation as well as field application by trained personnel. Fits in the standard hinge cavity of 0.719"W x 0.438"H (nominal). Meets ASTM F2090-21, with additional benefits Prohibits the free passage of a 4” diameter rigid sphere Requires two separate actions to release the mechanism WOCD and egress release will not reduce the open area of the window unit beyond code requirements Avoids interference with operation or performance of window Fully concealed when window is closed Easy, accurate factory install. Field adjustment features allows for up to 1/8” sash sag adjustment from inside the home Suitable for wood, composite and vinyl windows Window Type Casement Window Material: Wood Composite Vinyl Recommended Mounting Screws #8 Pan Head, length and screw type dependent on application Field Installation Instructions from Window Manufacturers: (as always we recommend contacting your window dealer if you require more information on WOCD WindowPartsCenter.com is an after market parts company not a window manufacture). Marvin Modern and Ultimate Casement: https://www.marvin.com/f/1019562/x/8641870a63/casement-wocd-field-applied-instructions-19916498.pdf Current Safegard 2 Video Below Old Style No Longer With Red Clip Video Below- this style is no longer available replacement is the S1015
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
