High-Performance Damp-Proofing Cream for Remedial DPC Treatment Safeguard Dryzone is a patented, high-strength damp proofing injection cream formulated to control rising damp in masonry walls. Supplied in a 5L container, it offers a quick, clean, and effective solution for creating a chemical damp-proof course (DPC) in brick, stone, and rubble-filled walls. Dryzone is BBA approved and compatible with all common wall types, delivering long-lasting protection in heritage, residential, and commercial buildings. Key Features & Benefits Effective Against Rising Damp: Formulated to stop moisture rising through capillary action in masonry walls. Quick & Clean Application: No spillage or waste – injected directly into pre-drilled holes using a suitable applicator gun. Long-Lasting Performance: Once cured, it forms a durable chemical DPC that prevents damp for decades. BBA Approved: Certified to BBA Certificate No. 97/3363 for use in masonry and cavity wall construction. Minimal Disruption: Non-drip, low-odour formulation ideal for use in occupied buildings or sensitive environments. Product Details Type: Silane/siloxane-based injection cream Container Size: 5 Litres Coverage: Approx. 50 linear metres of 9" (225mm) thick wall per 5L Application: Inject into 12mm diameter holes at 120mm centres along the mortar course Suitable Substrates: Brick, stone, cavity walls, rubble-core masonry Tool Required: Dryzone Applicator Gun or similar pressure injection system SKU: DRYZONE5L Application Instructions Preparation: Drill 12mm holes along a continuous mortar joint at 120mm intervals. Recommended height is 150mm above external ground level. Injection: Fill each hole with Dryzone cream using an applicator gun, starting at the rear and slowly withdrawing the nozzle. Finishing: Plug or fill holes as needed once cream has been fully injected. Post-Treatment: Remove or treat salt-contaminated plaster and re-plaster using a breathable renovation render or salt-resistant plaster. Limitations Do not apply to walls with standing or pressurised water — use in conjunction with appropriate damp-proofing systems. Not suitable for use below -5°C or in saturated structural conditions without drainage correction. Health & Safety Contains silane/siloxane – avoid contact with eyes and skin. Use gloves and eye protection during application. Refer to the Safety Data Sheet (SDS) before use.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.