SainSmart ABS-Like Tough Resin Recommended Printing Settings: Applicable Wavelength: 395-405nm Recommended Operating Temperature: 18-35 ° C Exposure time: 8s Bottom Exposure Time: 20s-30s Parameters: Density (g/m3) :1.10-1.15 Viscosity: 200-300 (25℃ MPa·s) Hardness (Shore D): 81 Tensile Strength (Mpa) : 55-60 Elongation at break(%): 30-50% Flexural Strength (Mpa): 70-80 Flexural Modulus (Mpa) : 1300-1400 Note： Please shake well before print. Keep your room well-ventilated while printing. Do not touch the resin without wearing PPE. Keep resins sealed tightly in the bottles, out of direct sunlight and within 15℃ - 35℃. Do not expose resins to heat, flames, sparks or any source of ignition. Excellent Mechanical Properties SainSmart ABS-Like Tough Resin excels in its impact strength, shock resistance, hardness, tensile strength, bending strength, and wear resistance. Heavy-duty Aluminum Bottle Instead of commonly used plastic bottles, SainSmart uses solid, leak-proof, and airtight aluminum containers for the resin to prevent dent and breakage. Fast Modeling Improved raw components grant the resin with excellent fluidity, speeding up your 3D modeling, and delivering the great performance of the printed parts. Versatility With its excellent mechanical, it opens up the possibility for a new range of prototyping and engineering use.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
