Sunsynk Acure 7kW White Single-Phase Hybrid Inverter 7 kW single-phase hybrid inverter for solar PV, 48 V battery storage and backup-power installations. Connect up to 14 kW of PV access power across two MPPTs, allowing flexible array design for different roof orientations. Works with lead-acid and lithium-ion batteries, with automatic adaptation to a compatible lithium battery BMS. Sunsynk Acure 7kW hybrid inverter for solar and battery systems The black Sunsynk Acure 7kW Single-Phase Hybrid Inverter combines solar generation, low-voltage battery storage and AC supply management in one IP65-rated unit. It is suited to larger homes, small commercial premises and off-grid or backup-power systems where a single-phase supply is required. The inverter provides 7,000 W rated AC input/output power, supports up to 175 A battery charge and discharge current, and can provide off-grid peak power of twice its rated power for up to 10 seconds. Installation, commissioning and protection design should be completed by a qualified trusted partner. [file:60] Key features Solar-ready: two MPPT trackers and up to 14,000 W PV access power for optimised string layouts. Low-voltage battery compatibility: supports 40–60 V lead-acid or lithium-ion batteries with one battery input. Backup capability: 7 kW rated AC power with up to two-times-rated off-grid peak power for 10 seconds. Efficient energy conversion: 97.6% maximum efficiency, 96.5% European efficiency and 99% MPPT efficiency. Outdoor-capable enclosure: IP65 protection, intelligent air cooling and an operating temperature range of -40°C to +60°C. Where to use Use the Sunsynk Acure 7kW hybrid inverter in single-phase solar-and-battery systems for homes, farm buildings, workshops, small offices and light-commercial premises. Its two MPPTs can suit PV arrays installed over two roof aspects, subject to voltage, current and string-design limits. It can form part of an energy-storage and backup arrangement, but battery selection, load assessment, cable sizing, earthing and grid-connection requirements must be designed for the specific site. Contact Energian for UK expert support and help identifying compatible batteries and installation partners. [file:60] Technical specifications Model SunC2-7.0LV01WB Battery type Lead-acid or lithium-ion Battery voltage range 40–60 V Maximum charging current 175 A Maximum discharging current 175 A Lithium-ion charging strategy Self-adaption to BMS Number of battery inputs 1 Maximum PV access power 14,000 W Maximum PV input power 11,200 W Maximum PV input voltage 500 V Start-up voltage 125 V MPPT voltage range 150–425 V Rated PV input voltage 370 V Maximum operating PV input current 32 A / 32 A Maximum input short-circuit current 48 A / 48 A Number of MPPT trackers / strings per MPPT 2 / 2+2 Rated AC input/output active power 7,000 W Maximum AC input/output apparent power 7,700 VA Peak power off-grid 2 times rated power, 10 seconds Rated AC input/output current 31.9 A / 30.5 A Maximum AC input/output current 35 A / 33.5 A Maximum continuous AC passthrough, grid to load 50 A Rated input/output voltage range 220 V / 230 V; 0.85Un–1.1Un Grid connection form L/N/PE Rated input/output grid frequency range 50 Hz: 45–55 Hz; 60 Hz: 55–65 Hz Power factor adjustment range 0.8 leading–0.8 lagging Total current harmonic distortion THDi <3% of nominal power DC injection current <0.5% In Maximum efficiency 97.6% European efficiency 96.5% MPPT efficiency 99% Protection Integrated DC polarity reverse connection protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, overvoltage load drop protection, ground fault current monitoring, optional arc fault circuit interrupter, power network monitoring, island protection monitoring, earth fault detection, DC input switch, DC terminal insulation impedance monitoring, residual current RCD detection Surge protection level Type II DC, Type II AC Display LCD / LED Communication interface RS485 / RS232 / CAN Monitoring mode GPRS / WiFi / Bluetooth / 4G / LAN optional Operating temperature range -40°C to +60°C; derating above +45°C Permissible ambient humidity 0–100% Permissible altitude 2,000 m Noise <30 dB Ingress protection rating IP65 Inverter topology Non-isolated Over-voltage category OVC II DC; OVC III AC Cabinet size (W × H × D) 366 × 630 × 281.41 mm, excluding connectors and brackets Weight 27.1 kg Cooling Intelligent air cooling Warranty 5 years; 10 years when installed with a Sunsynk battery Grid regulation G98/G99, NRS 097-2-1, EN 50549-1 Safety and EMC standards IEC/EN 61000-6-1, IEC/EN 61000-6-2, IEC/EN 61000-6-3, IEC/EN 61000-6-4, IEC/EN 62109-1, IEC/EN 62109-2 Documents available for download Sunsynk Acure Single-Phase Hybrid Inverter Datasheet Sunsynk Acure Single-Phase Hybrid Inverter Installation and User Manual Shipping Available for shipping to the UK, Ireland, Africa, the Caribbean and worldwide. If the shipping rate is not shown at checkout, contact us on +44 2080 640335 or [email protected] for a quote. UK expert support UK expert support is available for product questions, battery compatibility and system-design support. Contact Energian by phone, email or live chat, or visit our office for an in-person consultation.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
