Victron BMV-700 500A 12V / 24V / 48V Battery Monitor with Shunt Displays battery voltage, current, power, state of charge, consumed amp-hours and estimated time remaining on a flush-mounted LCD display. Includes a high-precision 500A / 50mV shunt, 10m display cable and fused positive battery connection cable. Programmable alarms and relay output help protect the battery bank and can control non-critical loads or a generator-start circuit. Victron BMV-700 battery monitor The Victron BMV-700 is a precision battery monitor for 12V, 24V and 48V battery systems. It measures charge and discharge current through the supplied shunt, then calculates state of charge, power consumption, consumed amp-hours and estimated time remaining. The flush-mounted LCD provides a clear local view of battery condition, while the stored history helps identify discharge patterns and battery performance. It is suitable for lead-acid and lithium battery banks when configured for the battery manufacturer’s requirements. Key features Clear battery information: Displays voltage, current, power, consumed amp-hours, state of charge and remaining time at the current discharge rate. 500A shunt included: Supplied with a 500A / 50mV quick-connect shunt and connection kit. Programmable protection: Visual and audible alarms, plus a programmable relay for low-battery warnings, load control or generator-start functions. Historical data: Records battery use and health indicators, including deepest discharge, total amp-hours drawn and time since the last full charge. VE.Direct connectivity: Connect to compatible GX devices; add a VE.Direct Bluetooth Smart dongle separately for VictronConnect app monitoring. Where to use Use the Victron BMV-700 in campervans, motorhomes, boats, off-grid solar systems, mobile work vehicles and backup-power installations. It is suited to battery systems where a permanent local display is preferred. Install the shunt in the main battery negative cable, close to the battery. All charge sources and DC loads that need to be included in the calculation must connect on the system side of the shunt. UK expert support is available for battery-monitor selection and installation planning. Technical specifications Model Victron BMV-700 Product type Precision battery monitor with LCD display and external shunt Nominal system voltage 12V, 24V and 48V DC systems Supply voltage range 6.5–95V DC Current draw, backlight off Less than 4mA Battery capacity range 1–9999Ah Operating temperature range -40°C to +50°C Supplied shunt 500A / 50mV quick-connect shunt Input current range with supplied shunt -500A to +500A Alternative shunt capability Up to 9999A and 75mV when correctly configured; alternative shunt not included Relay 60V / 1A normally open; function can be inverted Communication VE.Direct communication port Bluetooth Via optional VE.Direct Bluetooth Smart dongle; not built in Current resolution ±0.01A Voltage resolution ±0.01V Amp-hour resolution ±0.1Ah State-of-charge resolution ±0.1% Time-to-go resolution ±1 minute Current measurement accuracy ±0.4% Voltage measurement accuracy ±0.3% Display installation Flush mount Display front diameter 63mm Square bezel dimensions 69 × 69mm Display body diameter and depth 52mm diameter × 31mm depth Shunt dimensions 120 × 25 × 50mm Shunt connection bolts M10 Display weight 70g Shunt weight 315g Protection category IP55; not intended for outdoor use Included cables 10m RJ12 display cable and 1m positive supply cable with 1A slow-blow fuse Included mounting accessories Square and round display bezel options, rear securing ring and four mounting screws Standards Safety: EN 60335-1; emission/immunity: EN 55014-1 and EN 55014-2; automotive: ECE R10-4 and EN 50498 Documents available for download Victron BMV-700 Datasheet Victron BMV-700 User Manual Victron BMV-700 Installation Guide Shipping Available for shipping to the UK, Ireland, Africa, the Caribbean and worldwide. If the shipping rate is not shown at checkout, contact us on +44 2080 640335 or [email protected] for a quote. UK expert support UK expert support is available for battery-monitor selection, DC cable routing and Victron system integration. Contact us with any questions or support requests by phone, email or live chat, or visit our office for an in-person consultation.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
