SPECIFICATION The nRF24L01+ is a 2.4GHz ISM band transceiver Range: 800+ meters line of sight Includes on board support components and the RFX2401C which is the PA (Power Amplifier) and LNA (Low-Noise Amplifier) A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps). The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V. The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino. Weight: 13.28 g (0.468 oz) Board dimensions, excluding pins: 15.5mm (0.61/) width x 40.7mm (1.6/) length x 12.2mm (0.48/) height Dimensions of antenna, when angled at 90 degrees: 87mm (3.43/) height x 9.5mm (0.37/) diameter WHAT'S IN THE PACKAGE 1x Wireless Module 1x Antenna
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.